Coordinating supply across Southeast Asia from Singaporesales@grenglo.com

Sheet E-05 · pv dc equipment & protection

Solar PV Cables, DC Isolators, SPDs & Combiner Boxes

Specification-led supply of PV DC electrical materials for commercial arrays. Select cables, DC switch-disconnectors, surge protection, approved connectors and string combiner assemblies using the approved design and relevant IEC requirements.

Product sourcing

PV DC safety begins with rated electrical design.

Typical requirements

  • PV DC cables rated for system voltage and environment
  • DC switch-disconnectors and properly rated PV SPDs
  • Approved compatible connectors and DC combiner assemblies
  • Supply documentation for design-approved BOQs

Include in your RFQ

  • Module/inverter schedule and approved PV single-line diagram
  • String maximum Voc and current, DC device rating and poles
  • IEC/EN compliance evidence and OEM datasheets
  • String quantities, cable lengths, location and phased delivery
Product families

Five key photovoltaic DC equipment groups

Electrical component sourcing for commercial PV projects must be based on the approved string design, DC operating conditions, exact protective-device ratings, conductor construction and safe connector compatibility. These are specification-led items—not generic interchangeable electrical accessories.

Solar PV DC cables (IEC 62930 constructions)E-05.1

Solar PV DC cables (IEC 62930 constructions)

Single-core cables designed for solar photovoltaic DC circuits, subject to rated system voltage, outdoor exposure and specified conductor design.

  • DC voltage and conductor cross-section
  • IEC 62930 or approved construction
  • UV and weather exposure
  • Termination and bend radius
  • Circuit lengths and polarity identification
ApplicationsPV module-to-string junctions, array to combiner, combiner to inverter where the design specifies PV DC cable.
StandardsIEC 62930:2017 for specified 1.5 kV DC PV cables
Put in your RFQDC rating, 1C × mm² Cu, certification basis, insulation/sheath, outdoor routing, colours, quantity and drum cut lengths.
Selection guide

Request the exact approved PV cable construction and IEC 62930 test evidence; select Vdc, conductor cross-section, insulation/sheath, UV/ozone resistance, ambient temperature, polarity colour, minimum bend radius, termination compatibility and supplied cut/drum lengths.

Ask about this →
PV-rated DC switch disconnectors / isolatorsE-05.2

PV-rated DC switch disconnectors / isolators

DC switching equipment selected for photovoltaic array voltage, fault/prospective currents, pole arrangements and actual load-break duty.

  • Maximum PV Voc and design current
  • DC load-break utilisation category
  • Pole connection and wiring diagram
  • Enclosure/IP, ambient and location
  • OEM references and country approvals
ApplicationsArray string isolation, maintenance and designated inverter / combiner disconnect points.
StandardsIEC 60947-3 together with applicable PV array design requirements
Put in your RFQSystem Vocmax, Isc/design current, DC switching category, poles, manufacturer's wiring diagram and enclosure/IP.
Selection guide

Confirm maximum open-circuit PV voltage under cold conditions, operating current, DC utilisation category, poles in series, design wiring, thermal derating, external handle/lockability and IP/location requirements. AC-rated isolators are not automatically suitable for PV DC.

Ask about this →
PV DC surge protective devices (SPDs)E-05.3

PV DC surge protective devices (SPDs)

DC surge protective devices for transient overvoltage mitigation on photovoltaic equipment, with electrical and installation ratings distinct from AC SPDs.

  • Ucpv versus array maximum voltage
  • Type 1/2 selection from risk assessment
  • Discharge current and Up data
  • System earthing and cable routing
  • Short-circuit withstand/backup protection
ApplicationsPV DC combiner boxes, inverter DC inputs and protected array boundaries where required.
StandardsIEC 61643-31:2018 — PV DC SPD requirements
Put in your RFQSPD Type, Ucpv, Iscpv, In/Imax/Iimp, earthing, enclosure, required indication/contact and quantities.
Selection guide

Select PV-specific SPD type, maximum continuous DC operating voltage Ucpv, In/Imax/Iimp where applicable, voltage protection level Up, back-up protection, short-circuit withstand and earthing/bonding location according to approved scheme.

Ask about this →
PV DC plug connectors and cable couplersE-05.4

PV DC plug connectors and cable couplers

Specified photovoltaic connectors designed for the manufacturer's cable diameter, conductor size, voltage/current and assembly tools; look-alike products are not automatically safe to mate.

  • Manufacturer and connector series
  • Approved mating pair and locking type
  • DC rating, cable diameter and mm²
  • Crimp tooling and contacts
  • Environmental/IP certificate
ApplicationsPV module leads, string extension cables, combiner interface cables.
StandardsIEC 62852 (photovoltaic DC connectors)
Put in your RFQOriginal series/MPN, mating side and contact, V/I, cable size/OD, approved crimp tooling, qty.
Selection guide

Confirm exact connector make/series and approved mating compatibility, rated Vdc and current, cable OD and mm² range, crimp contact/tool, locking mechanism, IP when mated and suitable operating temperature. Avoid cross-mating unapproved connector families.

Ask about this →
PV string combiner boxes / DC protection assembliesE-05.5

PV string combiner boxes / DC protection assemblies

Enclosed DC assemblies that bring specified module strings together and integrate fuse, isolator, SPD and monitoring functions as required by the approved DC design.

  • Number of strings / inputs
  • Max Voc/Isc and design current
  • Fuse, SPD and disconnector ratings
  • Thermal/IP and mounting
  • Single-line diagram and assembly tests
ApplicationsMulti-string PV arrays, project DC distribution and inverter-side protection arrangements.
StandardsIEC 62548-1 for PV array design; individual device standards apply
Put in your RFQApproved SLD, string count, Vocmax/Isc, fuse and SPD schedule, components and standards, IP, dimensions and delivery.
Selection guide

Begin with the PV single-line diagram, string count and maximum string Voc/Isc. Confirm string fuse sizing, DC SPD and isolator ratings, enclosure thermal/IP design, terminal wiring, monitoring features, earthing and assembly testing. Do not assume every array requires the same fuse arrangement.

Ask about this →

Grenglo handles commercial and industrial PV electrical-material RFQs in Singapore and selected regional markets. This is supply sourcing rather than a statement that we design, install, commission or certify solar arrays. The five families are an initial focus, not the limit of Grenglo's potential supply.

Engineering buyer guide

Selection criteria that matter

Send the approved single-line diagram, module and inverter schedules, array string design, DC voltage/current calculations and detailed BOQ. Confirm product certification with the actual offered datasheets; never substitute AC switching products or unapproved connector systems based on appearance alone.

FactorSpecification to sendTechnical note
PV array electrical basisModule, inverter, string count; design maximum Voc and currentsThe cold-temperature string Voc can exceed STC Voc; design must consider site conditions.
PV DC cableRated Vdc, Cu conductor size, IEC 62930 construction and temperatureDC PV cable is not automatically interchangeable with generic AC wire.
DC switch-disconnectorDC utilisation category, Ie/Ue, pole wiring and installation locationUse the maker's exact DC configuration and derating instructions.
DC SPDType, Ucpv, Up and surge/short-circuit ratingsSelect to the PV earthing and overvoltage protection design.
PV connectorsOriginal maker/series, approved mating and crimp toolingMixing lookalike connectors can increase contact resistance and failure risk.
Combiner assemblyString inputs, fused circuits, DC switching, SPD and IPComplete assembly needs technical design and test documentation.
Compliance packageIEC/EN declarations, test reports, origin and warrantyGeneric mentions of standards do not certify an offered device.
Logistics / project scheduleDelivery lot, pack dimensions and destinationConsolidate connector, cable, enclosure and accessory requirements before freight costing.
Engineering FAQs

Frequently asked questions

Can a normal AC switch-disconnector be used on a PV DC string?

Not without declared PV DC switching ratings and the manufacturer's permitted pole wiring; DC interruption behaviour and duty are different.

Why can string Voc exceed the module nameplate STC voltage?

The maximum open-circuit voltage may rise as cell temperature falls. The project designer should calculate it using the actual module data and design conditions.

Are MC4-type connectors universally cross-compatible?

No. Exact manufacturer/series and approved mating conditions are important; visual similarity is insufficient.

How do I select a PV DC SPD?

Start from array Vocmax, earthing and lightning/overvoltage risk design. Specify Ucpv, type, discharge capability, Up and short-circuit withstand.

Must every PV combiner have fuses on every string?

The requirement depends on the array design, parallel string configuration, module reverse-current rating and applicable rules. Use the approved protection schedule.

Does Grenglo supply full solar power installations?

The focus of this page is project electrical materials and equipment sourcing. Site design, electrical installation, approvals and commissioning are separate.

Need something not listed here?

These families are a starting point, not a full catalogue. Send the manufacturer part number, a nameplate photo or your schedule and we will check the supply route.